Installation Guidelines - Panametrics Sentinel User Manual

Chapter 1. Installation
1.6

Installation Guidelines

This section provides general information with respect to the mechanical and electrical installation, and should be
thoroughly reviewed before the system is installed. To ensure safe and reliable operation of the Sentinel, the system
must be installed in accordance with the guidelines established by Panametrics, as explained in this chapter.
WARNING!
WARNING!
WARNING!
8
The Sentinel Flow Measurement System can measure the flow rate of many gases,
some of which are potentially hazardous. The importance of proper safety practices
cannot be overemphasized.
Be sure to follow all applicable local safety codes and regulations for installing
electrical equipment and working with hazardous gases or flow conditions. Consult
company safety personnel or local safety authorities to verify the safety of any
procedure or practice.
To meet CE Mark requirements, all cables must be installed as described in Appendix A,
CE Mark Compliance.
Sentinel™ User's Manual