Entering Temperature And Pressure Constants - Panametrics Sentinel User Manual

3.9

Entering Temperature and Pressure Constants

Use PanaView to enter fixed values for flow temperature and pressure. To accomplish this, complete the following
steps:
1.
Make sure the system is connected to your computer, the system and the computer are turned ON, and
PanaView is up and running.
2. In the File menu, open the
3. Channel 1
To enter values for
4. Double click on the
5.
Enter the desired values and click on the
6. To set up temperature and/or pressure constants for
Temp or Pres option.
7.
When the appropriate temperature and pressure values have been entered, proceed to "Entering Velocity
Constants" on page lxxviii.
Figure 18: PanaView Temperature and Pressure (two separate displays)
Sentinel™ User's Manual
New Meter Browser
, click on the + sign before each level to open it (see Figure 43 on page lxvi).
Temp or Pres option and the
OK
.
Temperature or Pressure
button.
Channel 2 , repeat the above process with the
display appears (see Figure 59 below).
Chapter 3. Operation
Channel 2,
77