We,
declare under our sole responsibility that the
to which this declaration relates, are in conformity with the following harmonized standards:
•
EN 61326-1: 2006, Class A, Table 2, Industrial Locations
•
EN 61326-2-3: 2006
•
EN 61010-1: 2012, Overvoltage Category II
•
EN 60079-0: 2012
•
EN 60079-1: 2007
•
EN 60079-7: 2007
•
EN 60529: 1991 +A1: 2000
and the following previously harmonized standards:
•
EN60079-0: 2009
II 2 G Ex d IIB+H2 T6-T4 Gb or Ex d e IIB+H2 T6-T4 Gb, Ta = -40°C to +60°C, IP66
FM13ATEX0018X & IECEx FMG 13.0008X
•
EN 61241-0: 2006
•
EN 6124101: 2004
II 2 D Ex tD A21 T85°C, Ta = -40°C to +60°C, IP66
FM09ATEX0072X & IECEx FMG 09.0014X
following the provisions of the 2004/108/EC EMC, 2006/95/EC Low Voltage and 94/9/EC ATEX Directives.
The units listed above and any ancillary equipment supplied with them do not bear CE marking for the Pressure
Equipment Directive, as they are supplied in accordance with Article 3, Section 3 (sound engineering practices and
codes of good workmanship) of the Pressure Equipment Directive 97/23/EC for DN<25.
Billerica - September 18, 2015
Issued
Panametrics Sensing
1100 Technology Park Drive
Sentinel LCT Liquid Custody Transfer Ultrasonic Flowmeter
Sentinel LNG Cryogenic Liquids Ultrasonic Flowmeter
Sentinel SEN898 Ultrasonic Flow Transmitter
Billerica, MA 01821
USA
Mr. Gary Kozinski
Certification & Standards, Lead Engineer
Need help?
Do you have a question about the Sentinel and is the answer not in the manual?