Panametrics Sentinel User Manual page 50

Chapter 2. Initial Setup
2.4 Meter Security (cont.)
• Level 3 security are the users' accounts. The meter provides for three separate users. These accounts are:
User Name: User1
Default Password: User1
User Name: User2
Default Password: User2
User Name: User3
Default Password: User3
The system supervisor must initialize all three user accounts with new passwords, whether used or not, to prevent
unauthorized access to the meter parameters.
For additional accountability, an Audit Trail log is kept in permanent memory. This file cannot be erased except by
physical access to the main board of the meter electronics. To view the log, right click on the desired meter in the
meter browser, select Properties
parameter modification, the log records if the meter has been reset and/or when power to the electronics has been
interrupted (see Figure 34 below).
50
, then Security , then View Log
Figure 10: Example Audit Trail Log
. No password is needed to view the log. In addition to
Sentinel™ User's Manual