Chapter 3. Operation
3.4
Archiving Site Configuration Files (cont.)
Create a site file from the meter
OK
To save the current meter configuration to the PC, select
and then click
. You will be
prompted for the location and the name of the file in the next dialog. After the file is selected, PanaView will read the
current instrument parameters and write them to the site file.
Load a site file to the meter
OK
To load a stored configuration into the meter, click on
and then click
. You must then
locate the file to load. After the file is selected, PanaView will read the configuration file and load the parameters into
the instrument. After the process is complete, you must initialize the instrument in PanaView because its
configuration parameters have changed. See Chapter 2, Initial Setup, for instructions.
68
Sentinel™ User's Manual
Need help?
Do you have a question about the Sentinel and is the answer not in the manual?