Panametrics Sentinel User Manual page 61

2.6.1.4 Diagnostics (cont.)
Plot:
Note:
To access the plot function of PanaView, first set the meter to Program mode.
• Plot Type: There are 5 different plots which PanaView can display:
FIFO Up - the raw upstream signal
FIFO Down - the raw downstream signal
Env Up - the modulated raw upstream signal
Env Down - the modulated raw downstream signal
Chi 2 - the Chi 2 function, which was calculated by the meter
For more detailed instructions for using the plot function, refer to the PanaView manual (910-211).
Sentinel™ User's Manual
Figure 16: Diagnostics Tab Display
Chapter 2. Initial Setup
61