Installing The System - Panametrics Sentinel User Manual

1.6.4 Installation Precautions (cont.)
• Make sure to leave enough clearance on the top and sides of the system to allow for maintenance work.
IMPORTANT: If a Transducer Insertion Mechanism is required, the recommended minimum clearance for transducer
replacement is a space 18" in diameter by 36" long around each transducer (see Figure 9 below).
1.7

Installing the System

Being mindful of the "Installation Precautions" on page xxii, complete the following steps:
1. Make sure the gaskets are in place on the flanges.
2. Support the Sentinel between the flanges on the pipe.
3.
Align the flange mounting holes (see Figure 10 below).
4.
Secure the spoolpiece to the pipe by using the appropriate hardware.
Sentinel™ User's Manual
Figure 9: Insertion Mechanism Minimum Clearance
Figure 10: Sentinel End View - Mounting Flange
Chapter 1. Installation
13