Nortel Communication Server 1000S Installation And Configuration Manual page 85

Table 18
NT5D16AA cable pins (Part 1 of 2)
Cable Name
0 T-PRI0TX
0 R-PRI0TX
0 T-PRI0RX
0 R-PRI0RX
ISDN Primary Rate Interface equipment overview
Note: On the I/O panel side, this cable is equipped with a monitor
bantam plug and a 15 pin D-type trunk connector mounted on a small
PCB. There are no bantam plugs on the DDP faceplate.
Figure 25
NT5D16AA
P5
Connector P5 - 9-pin, male, D-type (J5 on the DDP faceplate)
Connector P0: J2 - Monitor Bantam Plug, J3 - 15-pin, male, D-type
Connector P1; J2 - Monitor Bantam Plug, J3 - 15-pin, male D-type
Note:
This cable is only used in systems
equipped with I/O filter.
Table 18 lists the pin attributes for the NT5D16AA cable.
Description
Trunk 0 Transmit Tip
Trunk 0 Transmit Ring
Trunk 0 Receive Tip
Trunk 0 Receive Ring
ISDN Primary Rate Interface
8 ft.
DDP
Color pins (J5)
Black J5-1
Red J5-2
Black J5-3
White J5-4
Installation and Configuration
Page 85 of 394
J3
P0
J2
J3
P1
J2
I/O Panel
pins (J2, J3)
P0J3-1
P0J2-3
P0J3-9
P0J2-9
P0J3-3
P0J2-4
P0J3-11
P0J2-10