Nortel Communication Server 1000S Installation And Configuration Manual page 309

LD 73 — Defining the 2.0 Mb DTI ABCD signaling bit tables (Part 3 of 8)
Prompt Response
NRCV(S) abcd
N
P EOSF(S) abcd
N
TIME (100)-150
P EOSB(S) abcd
N
TIME (100)-150
P OPCA(R) abcd
N
TIME 64-(128)-192
REPT (1)-5
CONN(S) abcd
CONN(R) abcd
P RRC(S) abcd
N
TIME 10-(100)-150
P BURS(S) abcd
N
2.0 Mb DTI implementation
Description
Number received signal (send).
If NRCV(S) signal not required.
End of selection free (send).
If EOSF(S) not required.
Time for EOSF(S) in milliseconds.
End of selection busy (send).
If EOSB(S) not required.
Time for EOSB(S) in milliseconds.
Operator calling time (receive) signal.
If OPCA(R) not required.
Time of OPCA(R) pulse in milliseconds.
Number of OPCA(R) pulses.
Connect send.
Connect receive.
Register recall (send) signal. Activated by Malicious Call
Trace.
If RRC(S) not required.
Time of RRC(S) signal in milliseconds.
Bring up receiver (send). Uses switch-hook flash timer for
timer.
If BURS(S) not required.
ISDN Primary Rate Interface
Page 309 of 394
Installation and Configuration