Nortel Communication Server 1000S Installation And Configuration Manual page 263

LD 17— Adding a PRI card
Prompt Response
REQ CHG
TYPE CFN
CEQU YES
PRI loop x
card x
TMDI (Yes)
No
LD 17 — Adding a D-channel interface (Part 1 of 3)
Prompt
REQ
TYPE
- ADAN
- CTYP
Description
Change existing data.
Configuration data block.
Changes to common equipment.
For Large Systems
For Small Systems and CS 1000S Systems
TMDI Card (Mode set to PRI OR TRK) Option 11C Cabinet
Other card
Response Description
CHG Change existing data.
ADAN Action Device And Number.
NEW DCH xx Add a primary D-channel (any unused SDI port.)
CHG DCH xx Change a primary D-channel.
OUT DCH xx Remove the primary D-channel, where:
xx =0-79.
DCHI DCHI = D-channel configuration for the NTAK09 card or
NTAK93.
MSDL MSDL = NTBK51 Downloadable D-channel
daughterboard.
TMDI TMDI = D-channel configuration on TMDI (NTRB21) card.
ISDN Primary Rate Interface
1.5 Mb PRI implementation
Installation and Configuration
Page 263 of 394