LD 73 — Defining the 2.0 Mb DTI pad tables (Part 4 of 4)
Prompt
Response
AFX
r t
ADD
r t
SATT
r t
ATO
r t
DTI2
r t
XUT
r t
XEM
r t
Description
Analog FEX trunks.
Analog DID trunks.
Analog satellite TIE trunks.
Analog TOLL office trunks.
2.0 Mb DTI trunk
(Prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=DTI2).
Analog CO trunk
(Prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=DTI2).
Analog TIE trunk
(Prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=DTI2).
The following pads are available for the 2.0 Mb DTI card. Their respective
codes are also given. Positive dB represents loss and negative dB represents
gain.
ISDN Primary Rate Interface
2.0 Mb DTI implementation
Installation and Configuration
Page 317 of 394