Nortel Communication Server 1000S Installation And Configuration Manual page 58

Page 58 of 394 ISDN Primary Rate Interface equipment overview
Table 12
NTCK79AA cable pins (Part 2 of 2)
Cable Name
1 R-PRI1RX
1
1
553-3001-201 Standard 2.00
Description
Trunk 1 Receive Ring
Outer metalized PVC
shield
3 stranded wire
Reference clock cables
The NTCG03AA (14 ft), NTCG03AB (2.8 ft), NTCG03AC (4.0 ft), or
NTCG03AD (7 ft), is a DDP2 card to Clock Controller cable, connecting
each of the CLK0 or CLK1 ports on the DDP2 faceplate to the primary or
secondary source ports on Clock Controller card 0 or 1.
Figure 13
NTCG03AA/AB/AC/AD
P1
Connector P1 - 4 pin, male, RJ11 (DDP2 faceplate)
Connector P2 - 9 pin, male, D-type (Clock Controller)
Note: Includes a 9 pin D-type adaptor.
MSDL/DCH cables
External DCH cable
The NTCK46 cable connects the DDP2 card to the
NT6D11AF/NT5K75AA/NT5K35AA D-Channel Handler card. The cable is
available in four different sizes:
• NTCK46AA (6 ft.) - DDP2 to DCH cable
September 2004
Color
Green
Bare
Bare
2.8, 4, 7 or 14 ft.
DDP2
pins NCTE pins
P1-8 P5 shield
N/C P1 Case
N/C P1 Case
P2
553-7384