Nortel Communication Server 1000S Installation And Configuration Manual page 268

Page 268 of 394
LD 16 — Configuring an ISDN service route (Part 1 of 2)
Prompt
REQ
TYPE
TKTP
DTRK
- DGTP
ISDN
- MODE
- - PNI
IFC
- CHTY
- CTYP
553-3001-201 Standard 2.00
1.5 Mb PRI implementation
Response
NEW
CHG
RDB
xxx
YES
PRI
YES
PRA
(0) 1-32700
xx
BCH
<CR>
September 2004
Description
Add new data.
Change existing data.
Route data block.
Trunk type.
Digital trunk route.
1.5 Mb PRI. Prompted only if PRA = YES in LD15.
ISDN option.
Route used for PRA only.
Private Network Identifier. Each customer data block
must have a unique PNI when multi-customer option is
equipped. PNI = 1 is typical for CUST = 0. It must be
matched by the PNI in the far-end RDB.
Note: Using the default value of PNI = 0, prevents
operation of features like NRAG, NACD and NMS.
Interface type.
Signalling type - prompted if DTRK is YES. D-channel
signalling for B-channels.
Call Type. Enter the call type to be associated with the
outgoing route for direct dialing using the trunk access
code (instead of NARS access code).
Software Input/Output: Administration
See the
(553-3001-311) for a listing of possible responses.