Nortel Communication Server 1000S Installation And Configuration Manual page 294

Page 294 of 394
LD 15 — Enabling ISDN option (Part 2 of 2)
Prompt
AC2
LD 16 — Enabling ISL option on a per-route basis, assigning a D-channel for each
route (Part 1 of 2)
Prompt
REQ
TYPE
CUST
ROUT
TKTP
553-3001-201 Standard 2.00
1.5 Mb ISL implementation
Response
NPA
NXX
INTL
SPN
LOC
Response
NEW
CHG
RDB
xx
0-511
0-127
TIE
September 2004
Description
Access Code 2. Enter call types (type of number) that
use access code 2. Multiple responses are permitted.
This prompt only appears on NARS equipped systems.
If a call type is not entered here, it is automatically
defaulted to access code 1.
E.164 National.
E.164 Subscriber.
International.
Special Number.
Location Code.
Description
Add new data.
Change existing data.
Route data block.
Customer number as defined in LD 15.
Route number
Range for Large System and CS 1000E system.
Range for CS 1000M Small System, Meridian 1 Small
System, CS 1000S system, Media Gateway 1000B,
and Media Gateway 1000T.
TIE Trunk route.