Nortel Communication Server 1000S Installation And Configuration Manual page 360

Page 360 of 394
LD 16 — Defining a PRI service route (Part 2 of 2)
Prompt Response
CTYP aaa
<CR>
INAC YES
LD 14 — Defining service channels and PRI trunks (Part 1 of 2)
Prompt Response
REQ NEW
CHG
TYPE TIE
TN l ch
RTMB
0-511 1-4000
553-3001-201 Standard 2.00
2.0 Mb PRI implementation
Description
Call Type. Enter the call type to associate with the outgoing
route for direct dialing using the trunk access code (instead of
NARS access code).
Insert Access Code. Permits the NARS AC1 or AC2 access
code to be re-inserted automatically on an incoming ESN call.
This prompt only appears on a TIE route and is set to "YES" for
features such as Network ACD to function.
On an existing ESN network, setting this prompt to "YES" may
also require modifying the Digit Manipulation Index (DMI)
associated with this route at the far-end (so the Access Code is
not re-inserted twice). The INSERT prompt (INST) is bypassed
if INAC = YES.
Description
Add new data.
Change existing data.
Note: When assigning several members at once use the
multiple create command NEW XX.
TIE trunk only, allowed between MSL-1.
Loop and channel for digital trunks
Route number and Member number
Range for Large System and CS 1000E system.
September 2004