Nortel Communication Server 1000S Installation And Configuration Manual page 293

LD 15 — Enabling ISDN option (Part 1 of 2)
Prompt
REQ:
TYPE:
CUST
ISDN
PNI
HNPA
HNXX
HLOC
LSC
Response
NEW
CHG
NET
0-99
0-31
YES
1-32700
NPA
NXX
XXX
1-9999
ISDN Primary Rate Interface
1.5 Mb ISL implementation
Description
Add new data.
Change existing data.
Networking data.
Customer number
Range for Large System, Call Server 1000E, and
Media Gateway 1000E
Range for Small System, CS 1000S system,
Media Gateway 1000B, and Media Gateway 1000T
Customer is equipped with ISDN.
Customer private network identifier. This number
MUST be unique to this customer in the private
network. It is used to as part of the setup message for
feature operation such as Network Ring Again and
Network ACD.
Telephone area code for this system. Sent as part of
setup message as calling line identification.
Telephone local exchange code for this system. Sent
as part of setup message as calling line identification.
Home location code (NARS).
One to four digit Local Steering Code established in the
Coordinated Dialing Plan (CDP). The LSC prompt is
required for Calling Line I.D. and Network ACD.
Page 293 of 394
Installation and Configuration