Nortel Communication Server 1000S Installation And Configuration Manual page 307

LD 17 — Adding a 2.0 Mb DTI card
Prompt Response
REQ CHG
TYPE CEQU
...
DTI2 xx
LD 73 — Defining the 2.0 Mb DTI ABCD signaling bit tables (Part 1 of 8)
Prompt Response
REQ NEW
CHG
TYPE DTI2
FEAT ABCD
SICA 2-16
...
DFLT (1)-16
Incoming/Outgoing Calls:
IDLE(S) abcd
IDLE(R) abcd
FALT(S) abcd
8 LD 16 — Configuring the service routes
9 LD 14 — Defining the associated list of service trunks
Description
Change.
Common equipment.
Enter a card slot number for 2.0 Mb DTI.
Description
Add or change Digital Trunk Interface data block.
2.0 Mb/s DTI data block.
ABCD bit signaling category.
Signaling category.
Default signaling category used for default values
JDMI defaults to 16 with <CR>
(Send) idle signal bits.
(Receive) idle signal bits.
(Send) bits. 2.0 Mb DTI out-of-service.
ISDN Primary Rate Interface
2.0 Mb DTI implementation
3
.
Installation and Configuration
Page 307 of 394