Nortel Communication Server 1000S Installation And Configuration Manual page 328

Page 328 of 394
LD 14 — Defining the associated list of service trunks (Part 2 of 3)
Prompt Response
TOTN s c
PDCA (1) - 16
PCML (MU) A
CUST xx
NCOS
0-3
0-7
0-15
RTMB
0-511 1-4000
553-3001-201 Standard 2.00
2.0 Mb DTI implementation
Description
New card slot and channel, where:
• s = 1-9 DTI2 card slot number (Option 11C main cabinet)
s = 11-19 DTI2 card slot number (IP expansion cabinet 1)
s = 21-29 DTI2 card slot number (IP expansion cabinet 2)
s = 31-39 DTI2 card slot number (IP expansion cabinet 3)
s = 41-49 DTI2 card slot number (IP expansion cabinet 4)
• For CS 1000S:
s = 11-14 DTI2 card slot number (MG 1000S 1)
s = 21-24 DTI2 card slot number (MG 1000S 2)
s = 31-34 DTI2 card slot number (MG 1000S 3)
s = 41-44 DTI2 card slot number (MG 1000S 4)
• c = 1-30, 2.0 Mb DTI channel
Pad Category Number. This prompt is given if the card is a
2.0 Mb DTI card, or if the card is a 2.0 Mb DTI card and the
1.5/2.0 Mb Gateway feature is equipped. For 2 to 16, the pad
category used must already be defined in LD 73.
System PCM law.
Prompted if the card is 2.0 Mb DTI, or if the card is a 2.0 Mb
DTI card and the 2.0 Mb Gateway feature is equipped. MU,
the default, was entered in the PCML prompt in LD 17.
Customer number, as defined LD 15
Network class-of-service group number:
CDP
BARS/NFCR
NARS
Route number and Member number
Range for Large System and CS 1000E system.
September 2004