Nortel Communication Server 1000S Installation And Configuration Manual page 381

LD 16 — Enable the ISL option (Part 2 of 2)
Prompt Response
CTYP aaa
<CR>
INAC YES
LD 14 — Assign a channel identifier
Prompt Response
REQ NEW
CHG
TYPE TIE
TN
l s c u
c u
RTMB
0-511 1-4000
0-127 1-4000
CHID 1-240
Description
Call Type. Enter the call type to be associated with the outgoing
route for direct dialing using the trunk access code (instead of NARS
access code).
Insert Access Code. Permits the NARS AC1 or AC2 access code to
be re-inserted automatically on an incoming ESN call.
Description
Add new data.
Change existing data.
TIE trunk type.
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for CS 1000M Small System, Meridian 1 Small
System, CS 1000S system, Media Gateway 1000B, and
Media Gateway 1000T, where c = card and u = unit.
Route number and Member number
Range for Large System and CS 1000E system.
Range for CS 1000M Small System, Meridian 1 Small
System, CS 1000S system, Media Gateway 1000B, and
Media Gateway 1000T.
Channel identifier for ISL channels (remove with Xnn). Must
be coordinated with far-end (no default value).
ISDN Primary Rate Interface
2.0 Mb ISL implementation
Installation and Configuration
Page 381 of 394