Nortel Communication Server 1000S Installation And Configuration Manual page 357

LD 17 — Adding a DCHI or DDCH (Part 3 of 3)
Prompt Response
RLS XX
RCAP MSL
OVLR <CR>
LAPD YES (NO)
- T23 1-(20)-31
T200 2-(3)-40
- N200 1-(3)-8
- N201 4(260)
- K 1-(7)-32
LD 15 — Defining a PRI customer (Part 1 of 3)
Prompt Response
REQ: NEW
CHG
TYPE: NET
2.0 Mb PRI implementation
Description
Software release of far-end. This is the current software
release of the far-end. If the far-end has an incompatible
release of software, it prevents the sending of application
messages, for example, 'Network Ring Again.
MSDL RCAP capability.
Allow or disallow overlap receiving on a D-channel. Default
is NO.
Change LAPD parameters. Enter carriage return if timers
are left at default. The following timers are prompted only if
LAPD is set to YES. They are all left at default during initial
set-up.
Interface guard timer checks how long the interface takes to
respond. In units of 0.5 seconds (default 20 = 10 seconds).
Retransmission timer in units of 0.5 seconds (default 3 = 1.5
seconds).
Maximum number of retransmissions.
Maximum number of octets in information field.
Maximum number of outstanding unacknowledged frames
(NAKS).
Description
Add new data.
Change existing data.
Networking data.
ISDN Primary Rate Interface
Page 357 of 394
Installation and Configuration