Nortel Communication Server 1000S Installation And Configuration Manual page 355

LD 17 — Adding a PRI card (Part 2 of 2)
Prompt Response
CEQU YES
PRI2 xx
LD 17 — Adding a DCHI or DDCH (Part 1 of 3)
Prompt Response
REQ CHG
TYPE CFN
ADAN NEW DCH xx
CHG DCH xx
OUT DCH xx
CTYP MSDL
TMDI
Description
Changes to common equipment.
The PRI2 digital card number, where:
xx = 1-9 (Option 11C main cabinet), 11-19 (IP expansion
cabinet 1), 21-29 (IP expansion cabinet 2), 31-39 (IP expansion
cabinet 3), 41-49 (IP expansion cabinet 4.)
xx = 11-14, 21-24, 31-34, 41-44 of the first, second, third and
fourth MG 1000S, respectively.
Description
Change data.
Configuration data block.
Add a primary D-channel (any unused SDI port.)
Change a primary D-channel.
Out the primary D-channel, where:
xx = 1-9 for Option 11C main cabinet, 11-19 for IP expansion
cabinet 1, 21-29 for IP expansion cabinet 2, 31-39 for IP
expansion cabinet 3, and 41-49 for IP expansion cabinet 4.
xx = 11-14, 21-24, 31-34, 41-44 of the first, second, third and
fourth MG 1000S, respectively.
Card type where:
MSDL = The NTBK51BA Downloadable D-Channel
Daughterboard.
TMDI = TMDI (NTRB21) card.
ISDN Primary Rate Interface
2.0 Mb PRI implementation
Installation and Configuration
Page 355 of 394