Nortel Communication Server 1000S Installation And Configuration Manual page 156

Page 156 of 394
553-3001-201 Standard 2.00
NT8D72 and QPC720 PRI card installation
7 Plug the C11 or C21 connector into the single-ended connector of the
QCAD172A power cable.
8 Plug one of the two connectors at the other end of the C11 or C21
connector that was removed.
9 Plug the remaining connector of the QCAD172A power cable into the
added QUD15.
10 Adjust the QCAD111 power wiring harness, untie and then connect:
• the C17 power connection cable to the right rear Network shelf
• the C19 power connection cable to the left rear Network shelf
11 Install PRI trunks and enter related shelf and PRI office data into switch
memory.
September 2004
End of Procedure