Nortel Communication Server 1000S Installation And Configuration Manual page 266

Page 266 of 394
LD 15 — Defining a PRI customer (Part 2 of 3)
Prompt
LDN0
AC2
ISDN
- PNI
- HNPA
- HNXX
553-3001-201 Standard 2.00
1.5 Mb PRI implementation
Response
xxxx
NPA
NXX
INTL
SPN
LOC
YES
(0) 1-32700
NPA
NXX
September 2004
Description
Listed Directory number 0 must be defined for ISDN
PRI DID service.
The length of LDN0 determines the number of trailing
digits translated as the dialed DN on PRI DID routes.
Up to seven digits can be entered if DNXP option 150 is
equipped. Otherwise, up to four digits can be entered.
ESN Access Code 2. Enter incoming ISDN call types
(NARS network translation types) for which AC2 must
be inserted when INAC = YES in LD 16.
Multiple responses are allowed. Prompted only if NARS
is equipped. If a NARS call type is not entered here, it is
defaulted to AC1.
E.164 National.
E.164 Subscriber.
International.
Special Number.
Location Code
Customer is equipped with ISDN.
Private Network Identifier. Each customer data block
must have a unique PNI when multi-customer option is
equipped. PNI = 1 is typical for CUST = 0. It must be
matched by the PNI in the far-end RDB.
Note: Using the default value of PNI = 0 prevents
operation of features like NRAG, NACD and NMS.
Telephone area code for this system. Sent as part of
setup message as calling line identification.
Telephone local exchange code for this system. Sent as
part of setup message as calling line identification.