Nortel Communication Server 1000S Installation And Configuration Manual page 290

Page 290 of 394
LD 17 — Configuring the D-channel for ISL (Part 1 of 2)
Prompt
REQ
TYPE
ADAN
CTYP
CDNO
PORT
USR
IFC
DCHL
SIDE
553-3001-201 Standard 2.00
1.5 Mb ISL implementation
Procedure 38
Implementing dedicated mode
Configuring dedicated mode involves four major steps:
1 Configure the D-channel for ISL (LD 17).
2 Enable ISDN option (LD 15).
3 Enable the ISL option on a per route basis, assigning a D-channel for
each route (LD 16).
4 Assign a channel identification to each trunk with the ISL option (LD 17).
Response
NEW
CHG
CFN
NEW DCH
0-79
DCHI
1-9 11-19 21-29
31-39 41-49
1
PRI
SL1
1-9
NET (USR)
September 2004
Description
Add new data.
Change existing data.
Configuration data block.
Add primary D-channel.
D-channel card type.
Card slot in which the card supporting the DCHI
resides.
Must be set to 1.
D-channel for ISDN PRI only.
Interface type.
PRI card number (Must match entry for CDNO).
Net: network, the controlling switch.
User: slave to controller.