Nortel Communication Server 1000S Installation And Configuration Manual page 379

LD 15 — Enable the ISDN option (Part 2 of 2)
Prompt Response
PNI 1-32700
HNPA NPA
HNXX NXX
HLOC XXX
LSC 1-9999
AC2
NPA
NXX
INTL
SPN
LOC
Description
Customer private network identifier. MUST be unique to this
customer in the private network. Used as part of the setup message
for feature operation such as Network Ring Again and Network
ACD.
Telephone area code for this system. Sent as part of setup message
as CLID.
Telephone local exchange code for this system. Sent as part of
setup message for calling line identification.
Home location code (NARS).
One to four digit Local Steering Code established in the Coordinated
Dialing Plan (CDP). The LSC prompt is required for Calling Line ID
and Network ACD.
Access Code 2. Enter call types (type of number) that use access
code 2. Multiple responses are permitted. This prompt only appears
on NARS equipped systems. If a call type is not entered here, it is
automatically defaulted to access code 1.
E.164 National.
E.164 Subscriber.
International.
Special Number.
Location Code.
ISDN Primary Rate Interface
2.0 Mb ISL implementation
Installation and Configuration
Page 379 of 394