Nortel Communication Server 1000S Installation And Configuration Manual page 295

LD 16 — Enabling ISL option on a per-route basis, assigning a D-channel for each
route (Part 2 of 2)
Prompt
DTRK
ISDN
MODE
DCHI
PNI
IFC
CTYP
INAC
LD 14 — Assigning a channel identification to each trunk with the ISL option
Prompt
REQ
TYPE
Response
YES/NO
YES
ISLD
XX
1-32700
SL1
<CR>
YES
Response
NEW
CHG
TIE
ISDN Primary Rate Interface
1.5 Mb ISL implementation
Description
Enter YES if this is a Digital Trunk Interface (DTI or
PRI).
ISDN option.
Route for ISL application.
DCHI port number in CFN which carries the D-channel
for this TIE Trunk route.
Customer private network identifier. Must be the same
as the CDB PNI at the far-end.
Interface type.
Interface type
Call Type. Enter the call type to be associated with the
outgoing route for direct dialing using the trunk access
code (instead of NARS access code). See the Software
Input/Output: System Messages (553-3001-411) for a
list of valid responses.
Insert Access Code. Permits the NARS AC1 or AC2
access code to be re-inserted automatically on an
incoming ESN call.
Description
Add new data.
Change existing data.
TIE Trunk type.
Page 295 of 394
Installation and Configuration