Nortel Communication Server 1000S Installation And Configuration Manual page 326

Page 326 of 394
LD 16 — Configuring the service routes (Part 2 of 3)
Prompt Response
PTYP
(ATT)
AST
AOT
(DTT)
DCT
DST
AUTO YES (NO)
ICOG IAO
ICT
OGT
SRCH (LIN)
RRB
ACOD xxxx
TARG 1-15
OABS 0-9
INST (0)-999
CNTL (NO) YES
NEDC
ETH
553-3001-201 Standard 2.00
2.0 Mb DTI implementation
Description
Port type at far-end:
Analog TIE trunk routes:
Analog TIE trunk.
Analogue satellite system TIE trunk or ESN satellite
Meridian SL-1 TIE trunk.
Analogue TIE trunk, used instead of ATT whenever the
system has one or more digital satellite trunk routes (DST) to
any digital satellite system which includes OPX sets.
Digital TIE trunk routes:
Digital TIE trunk.
Combination digital TIE trunk.
Digital satellite system TIE trunk.
Auto-terminate must be NO if response to DSEL is VOD.
Incoming and outgoing trunk.
Incoming trunk.
Outgoing trunk.
Linear search, or round-robin search, used for outgoing
trunks.
Trunk route access code.
Trunk access restriction group for routes.
Outgoing digit(s) to be absorbed.
Digits to be inserted.
Changes to controls or timers.
Near-end disconnect control.
Either end control.
September 2004