Nortel Communication Server 1000S Installation And Configuration Manual page 316

Page 316 of 394
LD 73 — Defining the 2.0 Mb DTI pad tables (Part 3 of 4)
Prompt Response
The following prompts define the pad levels.
The receiving pad code is r and the transmission pad code is t. These entries have the range 0-
15. The pad values (in decibels) relating to these codes are shown after this table.
ONP r t
OPX r t
TNLS YES (NO)
DFLT (1)-16
The following prompts define the pad levels.
The receiving pad code is r and the transmission pad code is t. These entries have the range 0-
15. The pad values (in decibels) relating to these codes are shown after this table.
ONP r t
OPX r t
DTT r t
SDTT r t
NTC r t
TRC r t
DCO r t
VNL r t
DTO r t
ACO r t
553-3001-201 Standard 2.00
2.0 Mb DTI implementation
Description
On-premises extension.
Off-premises extension.
TN List. This is for the print command only.
A YES response means that a list of the trunk TNs using the
requested PAD category tables are printed after the table.
For NEW only. The table is used for default values.
On-premises extension.
Off-premises extension.
Digital TIE trunks.
Digital Satellite TIE trunks.
Nontransmission compensated.
Transmission compensated.
digital COT, FEX, WAT, and DID trunks.
Via Net Loss.
2.0 Mb DTI digital TOLL office trunks.
Analog CO or WATS trunks.
September 2004