Brake Band Installation; Brake Shaft Removal (Pro Series) - Toro Z Master Z400 Series Service Manual

3. Remove bolts, brake band retainer, spacers, and
brake band (Fig. 107).
A
Fig 107
A. 3 Bolts
B. Brake Band Retainer

Brake Band Installation

1. Install the brake band around the wheel hub (Fig.
108).
Fig 108
Z Master Z400 Service Manual
B
C
D
DSC-1626 rev
C. 3 Spacers
D. Brake Band
DSC-1629 rev
2. Install the 3 bolts, brake band retainer, brake band,
and spacers and tighten (Fig. 109).
Fig 109
3. Install wheel assembly and 4 wheel lug nuts.

Brake Shaft Removal (Pro Series)

1. Raise the rear end of the machine and remove both
right and left wheels.
Note: To prevent the unit from rolling, block the two
front tires.
CHASSIS
DSC-1631 rev
3-23
3