Toro Z Master Z400 Series Service Manual page 176

3. Remove the bearing shield and thrust washer (Fig.
472).
Fig 472
4. Remove the spindle housing from the spindle shaft
assembly (Fig. 473).
Fig 473
Z Master Z400 Service Manual
MOWER DECKS/PTO
5. Remove the ball bearing from the top of the spindle
housing (Fig. 474).
PICT-0158
6. Remove the bearing spacer (Fig. 475).
PICT-0159 rev
Fig 474 PICT-0160 rev
Fig 475 PICT-0161
7
7-19