Toro Z Master Z400 Series Service Manual page 109

ENGINE
18. Reconnecting the choke cable:
a. Push the choke knob into the full down position
(Fig. 288).
b. Reconnect the z-bend of the choke cable to the
choke linkage. The choke linkage should be in
the full open position (right). Tighten the cable
clamp (Fig. 289).
5
5-22
Fig 288
PICT-0296
Fig 289 PICT-0297
19. Install the left hand guard strap and muffler guard to
the frame using the two sets of fasteners (Fig. 290).
Fig 290
20. Install the hydraulic oil tank to the guard strap and
fuel tank support using the two sets of fasteners
(Fig. 291).
Fig 291
Z Master Z400 Service Manual
PICT-0273
PICT-0272