Toro Z Master Z400 Series Service Manual page 21

SPECIFICATIONS
Cutting Decks cont.
48" (121.9cm)
52" (132.1cm)
7-Gauge Deck
Deck Deck
Suspension suspended
from machine
by four lift
2
chains, and
attached to
front cross
member by flat
strut arms and
cross brace.
The deck is
pulled along
the ground.
Belt Covers Plastic HDPE
deck covers.
Attached with
swell latches.
Gage Wheels Three
adjustable
gage wheels
to reduce
scalping on
the front of
deck (one on
the left-hand
side and two
in the center).
Wheels
have four
adjustment
positions.
2-12
44" (111.8cm)
& SFS Deck
Deck suspended from machine by four lift chains, and attached to rear
wheel supports by two struts. The deck is pulled along the ground.
14-gauge,
formed steel
covers with
access holes
to allow
greasing of
outer spindles
without
removal.
Attached with
draw latches.
Three adjustable gage wheels to reduce scalping: three on front of deck (one
on left-hand side and two in center). Wheels have four adjustment positions.
Rear gage wheels are optional.
48" (121.9cm) 52" (132.1cm)
TF Deck TF Deck
Plastic HDPE deck covers.
Attached with swell latches.
112cm (44") 132cm (52")
SFS Deck TF Deck
14-gauge, Plastic HDPE
formed steel deck covers.
covers with Attached with
access holes swell latches.
to allow
greasing of
outer spindles
without
removal.
Attached with
draw latches.
Z Master Z400 Service Manual