Kohler 18 Hp Single Cylinder Install - Toro Z Master Z400 Series Service Manual

ENGINE
20. Remove the engine pulley (Fig. 311).
21. Remove the 4 engine mounting bolts and washers
(Fig. 312).
5
5-28
Fig 311 PICT-0018c
Fig 312 PICT-0334
22. Connect chains to the two lift points on the engine
and raise the engine from the frame (Fig. 313).
Fig 313

Kohler 18 hp Single Cylinder Install

1. Lower the engine onto the frame. Install 4 bolts and
spring washers through the frame and into the base
of the engine. Tighten the bolts.
2. Apply anti-seize compound to the engine crankshaft
(Fig. 314).
Fig 314
Z Master Z400 Service Manual
PICT-0341
PICT-0025c