ENGINE
11. Remove the red wires located on the starter solenoid
(Fig. 303).
12. Remove the blue wire located on the starter solenoid
(Fig. 304).
5
5-26
Fig 303
PICT-0331
Fig 304
PICT-0332
13. Remove the mower drive belt from the electric PTO
clutch. Refer to Replacing the Mower Deck Drive
Belt page x-xx.
14. Remove the plastic tie holding the clutch harness to
frame (Fig. 305).
Fig 305
15. Unplug the clutch pigtail harness from the main
harness (Fig. 306).
Fig 306
Z Master Z400 Service Manual
PICT-0099a
PICT-0100a