Toro Z Master Z400 Series Service Manual page 70

3. Loosely install the two bolts and nuts retaining the
hydrostatic pump to the frame (Fig. 160).
Fig 160
4. Install the case drain hydraulic hose and hose clamp
located on the top inside of the hydrostatic pump
(Fig. 161).
Fig 161
Z Master Z400 Service Manual
HYDRAULIC SYSTEM
5. Install the pump suction hydraulic line located on the
front of the hydrostatic pump (Fig. 162).
PICT-0091a
6. Install the two high pressure hydraulic lines located
at the rear of the hydrostatic pump (Fig. 163).
PICT-0083a
Fig 162 PICT-0084a
Fig 163 PICT-0086a
4
4-5