MOWER DECKS/PTO
Mower Deck Installation
Estate Series
1. Slide the deck under the unit.
2. Place 4 x 4 wood blocks under the edge of the
mower deck.
3. Position the lift handle to the lowest position and pin
in place (Fig. 416).
4. Inspect the cross brace bushings for wear. Replace
as needed.
7
7-4
Fig 416
PICT-0138
5. Install the cross brace to the deck using the
hardware as shown (Fig. 417).
B
A
Fig 417
A. Bolt
B. Bushing
6. Attach the front and rear lift chains to the mower
deck (Fig. 418).
Fig 418
Z Master Z400 Service Manual
D
C
PICT-0143
C. Washer (2)
D. Nut
PICT-0126