ENGINE
10. Remove the fuel line clamp holding the fuel line to
the fuel pump. Remove the fuel line from the fuel
pump (Fig. 218).
11. Remove the Mower Deck Drive Belt. Refer to Re-
placing the Mower Deck Drive Belt on page x-xx.
12. Remove the plastic tie holding the clutch harness to
frame (Fig. 219).
5
5-4
Fig 218
PICT-0013c
Fig 219
PICT-0099a
13. Unplug the clutch pigtail harness from the main
harness (Fig. 220).
Fig 220
14. Remove the center bolt and two spring washers
holding the electric PTO clutch (Fig. 221).
Fig 221
Z Master Z400 Service Manual
PICT-0100a
PICT-0014c