Brake Band Installation; Brake Cross Shaft Removal - Toro Z Master Z597 Service Manual

CHASSIS
3. Remove bolts, brake band retainer, spacers, and
brake band (Fig. 069).
A. 3 Bolts
B. Brake Band Retainer
C. 3 Spacers
D. Brake Band
A
3

Brake Band Installation

1. Install the brake band around the wheel hub (Fig.
070).
3-18
B
C
D
Fig 069 DSC-1626
Fig 070 DSC-1629
2. Install the 3 bolts, brake band retainer, brake band,
and spacers and tighten (Fig. 071).
Fig 071
3. Install tire assembly and the 4 wheel bolts.

Brake Cross Shaft Removal

1. Raise the rear end of the unit and remove the right
and left rear tires.
Note: To prevent the unit from rolling, block the two
front tires.
Z Master Z597 Diesel Service Manual
DSC-1631