4. Remove the belt from the electric PTO clutch (Fig.
442).
Fig 442
5. Raise the mower deck to the transport position.
Place 4 x 4 wood blocks under the edge of the
mower deck. Lower the mower deck to relieve the
tension on all four lift chains (Fig. 443).
Note: It may be necessary to push down on the lift
lever and pin into place to relieve tension on
the lift chains.
Fig 443
Z Master Z400 Service Manual
MOWER DECKS/PTO
6. Remove the four sets of bolts, spacers and washers
holding the front and rear lift chains to the mower
deck (Fig. 444).
PICT-0122
7. Remove the nut and bolt holding the strut pin to the
deck (Fig. 445).
PICT-0376
Fig 444
PICT-0377
Fig 445
PICT-0379
7
7-11