Toro Z Master Z400 Series Service Manual page 42

9. Install the wheel bearing (Fig. 067).
Fig 067
10. Install the caster seal (Fig. 068).
Fig 068
Z Master Z400 Service Manual
11. Repeat steps 8-10 for the other side of the wheel.
12. Install one spacer nut onto the caster axle (Fig. 069).
PICT-0022 rev
13. Insert caster axle/nut assembly into the wheel hub
and install the second spacer nut (Fig. 070).
PICT-0021 rev
Note: Spacer nuts should be installed an equal
distance onto each end of the caster axle.
CHASSIS
Fig 069 PICT-0024 rev
Fig 070 PICT-0025 rev
3
3-11