Toro Z Master Z400 Series Service Manual page 131

ENGINE
18. Reconnecting the choke cable:
a. Position the choke knob in the full down position
(Fig. 374).
b. Reconnect the z-bend of the choke cable to the
choke linkage. The choke linkage should be in
the full open position (far left). Tighten the cable
clamp (Fig. 375).
5
5-44
Fig 374 PICT-0296
Fig 375 PICT-0421
19. Install the muffler guard assembly using 9 sets of
fasteners (Fig. 376).
Fig 376
20. Install the hydraulic oil tank using two bolts and nuts.
Secure the tank to the guard strap and fuel tank
support (Fig. 377).
Fig 377
Z Master Z400 Service Manual
PICT-0400
PICT-0398