Toro Z Master Z400 Series Service Manual page 165

MOWER DECKS/PTO
12. Slide the mower deck out the right side of the unit
(Fig. 431).
Mower Deck Installation
Z 400 Series (48" and 50" Decks)
1. Turn the right front wheel so the castor fork is angled
forward. This will allow more clearance to slide the
mower deck under the frame (Fig. 432).
7
7-8
Fig 431 PICT-0308
Fig 432 PICT-0307
2. Slide the deck under the unit.
3. Place 4 x 4 wood blocks under the edge of the
mower deck (Fig. 433).
Fig 433
4. Install the right and left struts into the strut bases.
Note: When installing the rear push struts you must
mount the push strut into the lower hole on
the inside of the strut base (Fig. 434).
A
B
Fig 434
A. Right hand push
strut install
Z Master Z400 Service Manual
PICT-0304
PICT-312 rev
B. Left hand push
strut install