22. Remove the engine pulley, spacer and key (Fig.
354).
Fig 354
23. Remove the 4 engine mounting bolts, washers and
nuts (Fig. 355).
Fig 355
Z Master Z400 Service Manual
24. Connect chains to the two lift points on the engine
and raise the engine from the frame (Fig. 356).
PICT-0414
Z 100 Series FH580V (KAI) 19 hp
Kawasaki Install
1. Lower the engine onto the frame. Install the 4
engine mounting bolts, washers and nuts through
the frame and engine mounts. Tighten the bolts.
2. Apply anti-seize compound to the engine shaft (Fig.
357).
PICT-0416
ENGINE
Fig 356
PICT-0419
Fig 357
PICT-0025c
5
5-39