Toro Z Master Z400 Series Service Manual page 166

5. Install the front and rear lift chains to the mower
deck (Fig. 435).
Fig 435
6. Raise the deck to the transport position. Remove the
4x4 wood blocks.
7. Set the lift handle at the 3" (7.6cm) height-of-cut
position. Pin in place (Fig. 436).
Fig 436
Z Master Z400 Service Manual
MOWER DECKS/PTO
8. Route the belt around the spindles, idler pulleys and
the PTO clutch (Fig. 437).
PICT-0305
1. Fixed idler arm
2. Square hole
3. Fixed idler pulley
PICT-0313
Fig 437 fig. 49 G001678
4. Mower belt
5. Belt guide
6. Spring-loaded idler
pulley
7
7-9