Toro Z Master Z400 Series Service Manual page 108

15. Connect the fuel hose clamp onto the fuel hose at
the fuel pump (Fig. 284).
Fig 284
16. Turn the fuel shut-off valve to the "on" position (Fig.
285).
Fig 285
Z Master Z400 Service Manual
17. Reconnect the throttle cable:
a. Position the throttle control lever so that there is
approximately 1/2" (12.7mm) between the lever
and the full throttle position of the throttle slot
(Fig. 286).
PICT-0282
b. Reconnect the z-bend of the throttle cable to the
throttle linkage (the hole furthest from the pivot
point). Pull the cable housing until the throttle
linkage is in the full throttle position. Tighten the
cable clamp (Fig. 287).
PICT-0281
ENGINE
Fig 286 PICT-0293
Fig 287 PICT-0294
5
5-21