2. For ease of installation, make sure deck lift arm
plates, bushings and hardware are installed on the
deck lift lever assembly prior to installation (Fig.
129).
Fig 129
3. Install lift lever assembly into front frame pivot
location (Fig. 130).
Fig 130
Z Master Z400 Service Manual
4. Install bolt, nut and bushing through the plates into
the rear deck lift cross-shaft (Fig. 131).
PICT-0062 rev
5. Install the retainer clip on the deck lift lever assembly
shaft (Fig. 132).
PICT-0063
CHASSIS
Fig 131
PICT-0064
Fig 132
PICT-0065
3
3-29