ENGINE
10. Plug the clutch pigtail harness into the main harness
(Fig. 280).
11. Install the mower drive belt onto the electric PTO
clutch. Refer to Replacing the Mower Deck Drive
Belt page 7-24.
12. Plug in the engine wiring harness (Fig. 281).
5
5-20
Fig 280
PICT-0100a
Fig 281
PICT-0285
13. Connect the blue wire onto the starter solenoid (Fig.
282).
Fig 282
14. Connect the red wires onto the starter solenoid (Fig.
283).
Fig 283
Z Master Z400 Service Manual
PICT-0284
PICT-0283