Toro Z Master Z400 Series Service Manual page 117

ENGINE
7. Apply a thread locking compound to the clutch
retainer bolt (Fig. 319).
8. Install the center bolt and two spring washers that
hold the electric PTO clutch to the engine crankshaft
(Fig. 320).
5
5-30
Fig 319 PICT-0026c
Fig 320 PICT-0014c
9. Torque the center bolt to 55 ft-lbs. (Fig. 321).
Fig 321
10. Plug the clutch pigtail harness into the main harness
(Fig. 322).
Fig 322
Z Master Z400 Service Manual
PICT-0027c
PICT-0100a