5. Remove the brake bar from the machine (Fig. 103).
Fig 103
Brake Installation
Reverse the order of removal
Adjusting the Parking Brake
Check the parking brake for proper adjustment.
1. Check tire pressure of all 4 tires.
2. Disengage the brake lever (lever down).
Z Master Z400 Service Manual
3. Measure the distance vertically between the front
of the brake bar and the crown of the tire; the
measurement should be 7/8" to 1" (22 to 25mm)
(Fig. 104).
PICT-0045
1. Brake lever
2. Tire
3. Brake bar
4. 7/8" to 1" (22 to 25mm)
CHASSIS
Fig 104
Figure 45
5. Vertical line from the
front of brake bar to the
tire crown
3
3-21