Toro Z Master Z400 Series Service Manual page 55

CHASSIS
2. Remove the cotter pin and clevis pin from the brake
rod assembly (Fig. 110).
3
3. Remove the left and right clevis spring clips from the
brake shaft (Fig. 111).
3-24
Fig 110
PICT-0231
Fig 111 PICT-0234
4. Cut the plastic tie that holds the fuel line to the brake
shaft (Fig. 112).
Fig 112
5. On both the right and left side, remove two bolts and
nuts holding the flange bearings (Fig. 113).
Fig 113
Z Master Z400 Service Manual
PICT-0235
PICT-0236